suanPan-manual
  • Introduction
  • Basic
    • Obtain Application
    • Configure Application
    • Perform Analysis
    • Model Syntax
    • Model Structure
    • Tweak Performance
    • Compile Application
    • Build Documentation
    • Architecture Design
    • On Clusters
  • Example
    • Developer
      • element template
      • material template
    • Solid
      • wave propagation
    • Geotechnical
      • triaxial compression of sand
      • slope analysis
    • Structural
      • Statics
        • bending of a cantilever beam
        • bifurcation of a cantilever beam
        • double-edge notched specimen
        • lees frame
        • notched beam under cyclic loading
        • rc section analysis
        • truss roof
        • uniform tension of a rubber specimen
        • thin-walled section analysis for frame structures
        • calibration of subloading surface model
      • Dynamics
        • bouncing of a ball
        • mass-spring-dashpot system
        • dynamic analysis of a portal frame
        • elemental damping
        • particle collision
        • response history analysis of an elastic coupled wall
        • multi-support excitation
        • triple pendulum
        • computing response spectrum
        • integrate with python
        • process ground motion
      • Hybrid
        • vibration of a displaced beam
      • Buckling
        • buckling analysis of a cantilever beam
      • Contact
        • contact between beam and block
        • contact in 3d space
      • Optimization
        • evolutionary structural optimization
      • Isogeometric Analysis
        • linear analysis of a single element
    • Miscellaneous
      • batch execution for automation
  • Command Collection
    • Define
      • amplitude
      • bc
      • domain
      • element
      • expression
      • file
      • generate
      • group
      • import
      • initial
      • load
      • material
      • modifier
      • node
      • recorder
      • section
    • Configure
      • analyze
      • converger
      • criterion
      • integrator
      • precheck
      • step
    • Process
      • benchmark
      • clear
      • command
      • enable
      • exit
      • materialtest
      • materialtestbyload
      • sectiontest
      • peek
      • plot
      • protect
      • pwd
      • reset
      • save
      • set
      • upsampling
      • sdof_response
      • response_spectrum
  • Amplitude
    • Amplitude
    • Special
      • NZStrongMotion
    • Universal
      • Combine
      • Constant
      • Decay
      • Linear
      • Modulated
      • Tabular
      • TabularSpline
      • Trig
  • Constraint
    • MPC
    • ParticleCollision
    • RigidWall
    • RestitutionWall
    • FixedLength
    • MaxForce
    • NodeLine
    • NodeFacet
    • Embed2D
    • Embed3D
    • LJPotential2D
    • MaximumGap2D
    • MinimumGap2D
    • MaximumGap3D
    • MinimumGap3D
  • Converger
    • Converger
    • Absolute
      • AbsDisp
      • AbsError
      • AbsIncreDisp
      • AbsIncreAcc
      • AbsIncreEnergy
      • AbsResidual
    • Other
      • FixedNumber
      • Logic
    • Relative
      • RelDisp
      • RelError
      • RelIncreDisp
      • RelIncreAcc
      • RelIncreEnergy
      • RelResidual
  • Criterion
    • Criterion
    • MaxDisplacement
    • MaxHistory
    • MaxResistance
    • MinDisplacement
    • MinResistance
    • StrainEnergyEvolution
  • Element
    • Beam
      • B21
      • B21E
      • B21H
      • B31
      • B31OS
      • EB21
      • EB31OS
      • F21
      • F21H
      • F31
      • NMB21
      • NMB21E
      • NMB31
      • MVLEM
      • Orientation
    • Cube
      • C3D20
      • C3D4
      • C3D8
      • C3D8I
      • CIN3D8
      • DC3D4
      • DC3D8
    • Membrane
      • Couple Stress
      • Phase Field
        • DCP3
        • DCP4
      • Axisymmetric
        • CAX3
        • CAX4
        • CAX8
      • Plane
        • CP3
        • CP4
        • CP4I
        • CP5
        • CP6
        • CP7
        • CP8
      • Mixed
        • PS
        • QE2
      • Drilling
        • Allman
        • GCMQ
        • GQ12
      • Infinite
        • CINP4
      • Geotechnical
        • PCPE4DC
        • PCPE4UC
        • PCPE8DC
        • PCPE8UC
      • Membrane
    • Modifier
      • Modifier
      • ElementalLee
      • ElementalNonviscous
      • LinearViscosity
    • Patch
      • Patch
      • PatchCube
      • PatchQuad
    • Plate
      • DKT3
      • DKT4
      • Mindlin
    • Shell
      • DKTS3
      • DKTS4
      • S4
      • SGCMS
      • ShellBase
    • Special
      • Contact2D
      • Contact3D
      • Damper01
      • Damper02
      • Embedded2D
      • Embedded3D
      • Joint
      • Mass
      • SingleSection
      • Spring01
      • Spring02
      • Tie
      • TranslationConnector
    • Truss
      • T2D2
      • T2D2S
      • T3D2
      • T3D2S
  • Group
    • CustomNodeGroup
    • NodeGroup
    • ElementGroup
    • GroupGroup
  • Integrator
    • Implicit
      • Linear
      • BatheTwoStep
      • GeneralizedAlpha
      • OALTS
      • GSSSS
      • Newmark
        • LeeNewmark
        • LeeElementalNewmark
        • LeeNewmarkFull
        • LeeNewmarkIterative
        • Newmark
        • RayleighNewmark
        • WilsonPenzienNewmark
        • NonviscousNewmark
    • Explicit
      • Tchamwa
      • BatheExplicit
      • GeneralizedAlphaExplicit
  • Material
    • Guide
      • Metal
      • Customisation
    • Material1D
      • Concrete
        • ConcreteCM
        • ConcreteExp
        • ConcreteTsai
        • ConcreteTable
        • ConcreteK4
      • Degradation
        • Degradation
        • CustomStrainDegradation
        • CustomStressDegradation
        • Dhakal
        • TrilinearStrainDegradation
      • Elastic
        • BilinearElastic1D
        • Elastic1D
        • AsymmElastic1D
        • MultilinearElastic1D
        • PolyElastic1D
        • NLE1D01
        • Sinh1D
        • Tanh1D
        • CustomElastic1D
      • Hysteresis
        • AFC
        • AFCN
        • BilinearOO
        • BilinearPO
        • BoucWen
        • BWBN
        • Flag
        • MPF
        • MultilinearOO
        • MultilinearPO
        • RambergOsgood
        • SimpleHysteresis
        • SlipLock
        • SteelBRB
        • Trivial
        • Gap01
      • Viscosity
        • Kelvin
        • Maxwell
        • NonlinearViscosity
        • BilinearViscosity
        • CustomViscosity
        • Viscosity01
        • Viscosity02
        • CoulombFriction
        • Nonviscous01
      • vonMises
        • Subloading1D
        • ArmstrongFrederick1D
        • AFCO1D
        • Bilinear1D
        • BilinearMises1D
        • CustomGurson1D
        • CustomMises1D
        • ExpGurson1D
        • ExpMises1D
        • Mises1D
        • Multilinear1D
        • NonlinearGurson1D
        • VAFCRP1D
    • Material2D
      • AxisymmetricElastic
      • Concrete21
      • Concrete22
      • DuncanSelig
      • Elastic2D
      • Rebar2D
    • Material3D
      • CamClay
        • BilinearCC
        • ExpCC
        • NonlinearCamClay
        • ParabolicCC
      • Concrete
        • CDP
        • CDPM2
        • Rebar3D
        • TableCDP
        • CustomCDP
      • Damage
        • IsotropicDamage
        • LinearDamage
      • DruckerPrager
        • BilinearDP
        • ExpDP
        • CustomDP
        • NonlinearDruckerPrager
      • Elastic
        • BlatzKo
        • IsotropicElastic3D
        • IsotropicNonlinearElastic3D
        • MooneyRivlin
        • NLE3D01
        • OrthotropicElastic3D
        • Yeoh
      • Hoffman
        • BilinearHoffman
        • ExpHoffman
        • CustomHoffman
        • NonlinearHill
        • NonlinearHoffman
        • TimberPD
      • Sand
        • SimpleSand
        • DafalisaManzari
      • vonMises
        • ArmstrongFrederick
        • BilinearJ2
        • BilinearPeric
        • CustomGurson
        • TableGurson
        • CustomJ2
        • ExpGurson
        • ExpJ2
        • MultilinearJ2
        • NonlinearGurson
        • NonlinearJ2
        • NonlinearPeric
        • PolyJ2
        • VAFCRP
        • Subloading
    • MaterialOS
      • ElasticOS
    • Wrapper
      • Axisymmetric
      • Laminated
      • Parallel
      • PlaneStrain
      • PlaneSymmetric
      • PlaneStress
      • Rotation2D
      • Rotation3D
      • Sequential
      • Stacked
      • Uniaxial
      • OS146
      • OS146S
      • Substepping
  • Recorder
    • Recorder
    • OutputType
  • Section
    • Code
      • EU
      • NZ
      • US
    • Section1D
      • Circle1D
      • Fibre1D
      • Rectangle1D
      • TrussSection
    • Section2D
      • Bar2D
      • Box2D
      • Circle2D
      • CircularHollow2D
      • Fibre2D
      • HSection2D
      • ISection2D
      • Rectangle2D
      • TSection2D
    • Section3D
      • Bar3D
      • Box3D
      • Circle3D
      • CircularHollow3D
      • Fibre3D
      • ISection3D
      • Rectangle3D
      • TSection3D
    • SectionOS
      • Cell3DOS
      • Fibre3DOS
    • SectionNM
      • SectionNM
      • NM2D1
      • NM2D2
      • NM2D3
      • NM2D3K
      • NM3D1
      • NM3D2
      • NM3D3
      • NM3D3K
  • Solver
    • BFGS
    • MPDC
    • Newton
    • AICN
    • Ramm
  • Step
    • Overview
    • ArcLength
    • Buckle
    • Dynamic
    • Frequency
    • Optimization
    • Static
  • Developer
    • Prerequisites
    • C Style Interface
      • material
    • CPP Style Interface
      • material
      • element
      • constraint
Powered by GitBook
On this page
  • Syntax
  • Remarks
Edit on GitHub
  1. Section
  2. Section2D

HSection2D

PreviousFibre2DNextISection2D

Last updated 1 year ago

2D H-Section

Syntax

section HSection2D (1) (2...7) (8) [9] [10]
# (1) int, unique tag
# (2...7) double, section dimensions
# (8) int, material tag
# [9] int, number of integration points for flanges, default: 6
# [10] double, eccentricity/location, default: 0.0

Remarks

  1. Section dimensions are:

    • (2) left flange height

    • (3) left flange thickness

    • (4) right flange height

    • (5) right flange thickness

    • (6) web width

    • (7) web thickness

Two integration points are used for web. The user assigned number of integration points is used for flanges.

The eccentricity is measured from the centre of the web/flanges. If the left and right flanges have different sizes, the default trivial eccentricity will lead to extra bending moments when the section is subjected to axial force. Eccentricity can be manually adjusted.

See for more details.

Eccentricity
arrangement